Facing issues while connecting your Nighthawk router to the internet? Need not to worry! You are not alone baffling with Nighthawk router won’t connect to the internet issue. It is one of the most common yet major issues experienced by every Nighthawk router users around the world. But, you don’t have to worry as we are here to help you. Here, you will come to know some surefire ways to get rid of Nighthawk router won’t connect to the internet issue in minutes. Let’s take the plunge!
This piece of writing would proof helpful to you if you are bothered by one of the Nighthawk router issues highlighted below:
-
Nighthawk router fails to detect the internet connection
-
Failed to login to Nighthawk router because your router is not detecting the internet connection
-
Netgear Nighthawk app showing offline
-
Router connected but no internet
-
Netgear router not connecting to the modem
-
WiFi connected but no internet
-
Client device not detecting the router’s network name (SSID)
Fix: Nighthawk Router Won’t Connect to the Internet Issue
Usually, when your Nighthawk router won’t connect to the internet, you must reboot your router. After rebooting your Nighthawk router, you can try connecting your client device to the router and access the Netgear Nighthawk setup page.
Along with your Nighthawk router, you can reboot your modem, PC, laptop, and smartphone as well. As soon as you are done with the rebooting process, try to login to Nighthawk router on your client device and confirm whether your internet connection is working fine. If the issue still persists, move to the next troubleshooting tips highlighted below.
Check the Ethernet Connection
If the Ethernet cable is not successfully established between your Nighthawk router and modem, then also you might encounter with the issue. Thus, to fix it, make sure that the Ethernet connection between your Nighthawk router and modem is successfully established. Apart from that, make sure that the Ethernet cable you are using is in good condition.
Check Your Internet Connection
The next step to fix Nighthawk router won’t connect to the internet issue is checking your internet connection whether it is working fine or not. In order to check the root cause behind the issue is to contact your ISP and ask him whether he is giving you the actual internet speed you are paying for or not. Apart from that, you can also ask him to upgrade your device for better WiFi speeds.
Now, access the Netgear Nighthawk setup page. If the setup page of your Netgear Nighthawk router loads up without showing any error message, then fab! Your internet connection is working fine now. Else, head towards the next troubleshooting tip.
Configure Your Nighthawk Router Properly
If your Nighthawk router is not configured properly, then also you may face internet connectivity issues with it. So, to fix Nighthawk router won’t connect to the internet issue, make sure to configure it properly.
Note: While setting up your Nighthawk router, bear in mind that your router must be placed in reach of your modem.
Update the Router Firmware
Another main reasons why your Nighthawk router won’t connect to the internet issue is outdated firmware. To fix the issue, make sure that the firmware on your Netgear Nighthawk router is running the latest firmware version.
Pro Tip: Download and install the Netgear Nighthawk app for complete and step-by-step instructions to update the router’s firmware.
Verdict
So, these were some failsafe ways to resolve Nighthawk router won’t connect to the internet issue. However, you are still struggling with the same issue or you fail to perform the Netgear WiFi router setup process, it’s better to contact our expert technicians and let them help you out to fix the issue.
